TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 878 of 1158
TM 9-2320-366-20-5 23-12. WET TANK REPLACEMENT (CONT) WARNING Adhesives, solvents. and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (9) Apply antiseize compound to threads of pressure switch (6). (10) Install pressure switch (6) in wet tank (2). NOTE Perform step (11) on vehicles not previously equipped with corrosion enhanced clamps. (11) Position two clamps (7) on battery box (8). (12) Position wet tank (2) in two clamps (7) with self-locking nuts (9). (13) Tighten two self-locking nuts (9) to 4-5 lb-ft. lb-ft (5-7 N·m). (14) Connect connector P84 (10) to pressure switch (6). 23-54 Change 1