TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 875 of 1158
TM 9-2320-366-20-5 NOTE • Vehicles may be equipped with either corrosion enhanced clamps or non- corrosion enhanced clamps. Corrosion enhanced clamps have a self-locking nut and cork lining. When removing a non- corrosion enhanced clamp, replace it with a corrosion enhanced clamp. • Perform steps (3) through (5) on vehicles not equipped with corrosion enhanced clamps. (3) Remove two screws (5) from clamps (6). NOTE Note the orientation of wet tank prior to removal. (4) Remove wet tank (2) from two clamps (6). (5) Remove two clamps (6) from battery box (7). Discard clamps. NOTE Perform steps (6) and (7) on vehicles equipped with corrosion enhanced clamps. (6) Remove two self-locking nuts (8) from clamps (6). Discard self-locking nuts. NOTE Note the orientation of wet tank prior to removal. (7) Remove wet tank (2) from two clamps (6). Change 1 23-51