TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download

Page 858 of 1158

TM 9-2320-366-20-5 23-34 Change 2 23-11. AIR DRYER REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Air tanks drained (TM 9-2320-366-10-1). Booster Valve Removed (Para 11-5) Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Purge Valve Tool (Item E-23, Appendix E) Hammer, Hand (Item 18, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Nut, Plain, Hex (Item 34, Appendix D) Boot Kit, Exhaust (Item 3, Appendix G) Parts Kit, Dehydrator (Item 218, Appendix G) Nut, Self-Locking (4) (Item 168, Appendix G) Personnel Required (2) a. Removal. (1) Loosen input air hose nut (1). (2) Disconnect input air hose (2) from 90-degree fitting (3). (3) Disconnect outlet air hose (4) from 90-degree fitting (5). WARNING Air dryer may contain air pressure. Loosen input air hose connector slowly to vent off air pressure. Failure to comply may result in injury to personnel. Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel.