TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 826 of 1158
TM 9-2320-366-20-5 Section II. MAINTENANCE PROCEDURES 23-2. PRIMARY AND CENTRAL TIRE INFLATION SYSTEM (CTIS) AIR HOSES REPLACEMENT This task covers: a. Hose Locations b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Air tanks drained (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Cap and Plug Set (Item 14, Appendix D) a. Hose Locations WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. CAUTION Cap or plug hose connections to prevent contamination. Failure to comply may result in damage to equipment. NOTE • This task shows locations of primary air supply and CTIS air hoses on the vehicle. It will not be necessary to remove all hoses at one time. • Tag hoses and connection points prior to removal. • Note location of plastic cable ties prior to removal. • Remove plastic cable ties as required. • Inspect air hoses and fittings for cracks, kinks, nicks, stripped threads and cuts. Replace damaged parts. 23-2