TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 802 of 1158
TM 9-2320-366-20-5 Section II. MAINTENANCE PROCEDURES 22-2. M1089 AMBER WARNING LIGHT ASSEMBLY REPAIR This task covers: a. Disassembly b. Assembly c. Follow-On Maintenance INITIAL SETUP Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Vise, Machinist (Item 48, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Materials/Parts Adhesive (Item 5, Appendix D) Nut, Plain, Hex (Item 127, Appendix G) Materials/Parts (Cont) Nut, Self-Locking (2) (Item 128, Appendix G) Nut, Self-Locking (6) (Item 167, Appendix G) Grommet, Nonmetallic (Item 47, Appendix G) Lockwasher (4) (Item 77, Appendix G) Washer, Nylon (3) (Item 185, Appendix G) Washer, Nylon (3) (Item 284, Appendix G) Insert, Nylon (3) (Item 57, Appendix G) Insert, Nylon (2) (Item 59, Appendix G) a. Disassembly. (1) Remove amber warning light cable (1) from support bracket (2). NOTE Note location of clamp prior to removal. (2) Remove self-locking nut (3), washer (4), nylon insert (5), clamp (6), nylon washer (7), and washer (8) from screw (9). Discard self-locking nut, nylon insert, and nylon washer. (3) Remove two self-locking nuts (10), washers (11), nylon inserts (12), nylon washers (13), and washers (14) from screws (15). Discard self-locking nuts, nylon inserts, and nylon washers. (4) Remove support ring (16) from support bracket (2). 22-2