TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 80 of 1158
TM 9-2320-366-20-5 17-12. M1089 HOIST CABLE REPLACEMENT (CONT) (4) Insert wedge (5) in cable (1) loop and pull cable and wedge into sleeve (4). (5) Drive wedge (5) and cable (1) into sleeve (4) until seated. (6) Start engine (TM 9-2320-366-10-1). WARNING Never let moving cable slide through hands, even when wearing gloves. A broken wire could cut through gloves. Failure to comply may result in injury to personnel. NOTE After one complete layer of cable is on drum, provide tension on cable by physically pulling on cable so that cable spools on tightly. Leave enough cable unspooled to allow installation of hook block. (7) Reel in cable onto drum (TM 9-2320-366-10-2). c. Follow-On Maintenance. (1) Install hook block assembly (para 17-4). (2) Stow MHC (TM 9-2320-366-10-2). End of Task. 17-44