TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 792 of 1158
TM 9-2320-366-20-5 21-8 Change 2 21-5. MACHINE GUN RING CENTER SEAT REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Materials/Parts Sealing Compound (Item 60, Appendix D) Spacer (4) (Item 276.1, Appendix G) a. Removal. (1) Fold back of center seat (1) down and slide fully forward. (2) Remove two screws (2) and washers (3) from seat mount (4). (3) Remove two screws (2), washers (3), and spacers (4.1) from seat mount (4). Discard spacers. NOTE Perform step (2) on vehicles with cabs S/N 12075G or lower. Cab S/N located on B pillar. NOTE Perform step (3) on vehicles with cabs S/N 12076G or higher.