TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 78 of 1158
TM 9-2320-366-20-5 17-11. M1084/M1086 HYDRAULIC ACCUMULATOR REPLACEMENT This task covers: b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Packing, Preformed (Item 187, Appendix G) Packing, Preformed (Item 194, Appendix G) a. Removal. (1) Position drain pan under accumulator (1). (2) Disconnect hose (2) from 90-degree fitting (3). (3) Remove two nuts (4) from U-bolt (5). (4) Remove U-bolt (5) and accumulator (1) from channel bracket (6). (5) Remove protective bracket (7) from accumulator (1). (6) Remove 90-degree fitting (3) from accumulator (1). (7) Remove preformed packings (8 and 9) from 90-degree fitting (3). Discard preformed packings. b. Installation. (1) Install preformed packings (9 and 8) on 90-degree fitting (3). (2) Install 90-degree fitting (3) in accumulator (1). (3) Position accumulator (1) in protective bracket (7). (4) Install accumulator (1) on channel bracket (6) with U-bolt (5) and two nuts (4). (5) Connect hose (2) to 90-degree fitting (3). c. Follow-On Maintenance. (1) Test operate MHC (TM 9-2320-366-10-1). (2) Check for oil leaks around accumulator. (3) Stow MHC (TM 9-2320-366-10-1). End of Task. 17-42 Change 1 a. Removal.