TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 771 of 1158
TM 9-2320-366-20-5 Change 2 20-545 d. Installation. (1) Apply sealant on threads of three screws (1 and 2). (2) Position AFT Storage Box (3) in cab with three washers (4) and screws (1). (3) Position three washers (5) and screws (2) in AFT Storage Box (3). (4) Tighten three screws (1 and 2) to 70-85 lb-in. (8-10 N•m). (5) Apply sealant to threads of screws (6 and 7). (6) Position washer (8) and screw (7) in AFT Storage Box (3). (7) Position angle (9) on cab with washer (10) and screw (6). (8) Position angle (9) on AFT Storage Box (3) with washer (11), screw (12), and self-locking nut (13). (9) Tighten two screws (6 and 7) to 70-85 lb-in. (8-10 N•m). (10) Tighten self-locking nut (13) to 95-110 lb-in. (11-12 N•m). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.