TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 763 of 1158
TM 9-2320-366-20-5 Change 2 20-537 (19) Apply sealant to threads of four screws (40). (20) Install head pad (41) on front head pad brace (35) with four washers (42) and screws (40). d. Installation. (1) Position bottom support (1) and rack assembly (2) in cab. (2) Apply sealant to threads of eight screws (3) and six screws (4). (3) Position rack assembly (2) on bottom support (1) with eight washers (5) and screws (3). (4) Tighten eight screws (3) to 110-120 lb-in. (12-13 N•m). (5) Position MTS plate (6) on bottom support (1) with four washers (7) and screws (4). (6) Position two washers (7) and screws (4) in bottom support (1). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.