TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 761 of 1158
TM 9-2320-366-20-5 Change 2 20-535 (4) Position two washers (8) and screws (9) in inner side support (10) with two self locking nuts (11). (5) Tighten two self-locking nuts (11) to 110-120 lb-in. (12-14 N•m). (6) Apply sealant to threads of four screws (12). (7) Install EPLRS shelf (13) and inter side support (10) on support legs (4) with four washers (14) and screws (12). (8) Position outside support (15) on inter side support (10) with three washers (16), screws (17), and self- locking nuts (18). (9) Position mid rear support (19) on EPLRS shelf (13) with three washers (20), screws (21), and self locking nuts (22). (10) Position four washers (23) and screws (24) in support legs (4) with self-locking nuts (25). (11) Tighten three self-locking nuts (22) and four self- locking nuts (25) to 110-120 lb-in. (12-13 N•m). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel.