TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 752 of 1158
TM 9-2320-366-20-5 20-526 Change 2 20-81. DIGITIZATION KIT POWER CABLE REMOVAL/INSTALLATION (CONT) (20) Install terminal lug TL25 (44) on dashboard (32) with screw (45). (21) Install terminal lug TL19 (46) on dashboard (32) with screw (47). (22) Remove terminal lug TL22 ring terminal (48) from NEW digitization power cable and strip insulation 5/16 in (8 mm). (23) Install terminal lug TL22 spade terminal (48) on NEW digitization power cable. (24) Remove terminal lug TL22, ring terminal (49) from NEW digitization power cable and strip insulation 5/16 in (8 mm). (25) Install terminal lug TL22, spade terminal (49) on NEW digitization power cable and wire 146. NOTE Perform steps (22) and (23) if replacing the digitization power cable on vehicle serial numbers 0001 through 11347 equipped with WTEC II controller. NOTE Perform steps (24) and (25) if replacing the digitization power cable on vehicle serial numbers 00001 through 11347 equipped with WTEC III controller.