TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 748 of 1158
TM 9-2320-366-20-5 20-522 Change 2 20-81. DIGITIZATION KIT POWER CABLE REMOVAL/INSTALLATION (CONT) (24) Remove circuit breakers from distribution panels PD1 and PD2 (para 20-80). (25) Remove four nuts (58), lockwashers (59), screws (60), and distribution panel PD1 (61) from power distribution shelf (40). Discard lockwashers. (26) Remove two nuts (62), lockwashers (63), screws (64), and distribution panel PD2 (65) from power distribution shelf (40). Discard lockwashers. (27) Remove digitization power cable (66) from vehicle. b. Installation (1) Position digitization power cable (1) in vehicle. (2) Install distribution panel PD2 (2) on power distribution shelf (3) with two screws (4), lockwashers (5), and nuts (6). (3) Install distribution panel PD1 (7) on power distribution shelf (3) with four screws (8), lockwashers (9), and nuts (10). (4) Install circuit breakers in distribution panels PD2 and PD1 (para 20-80). NOTE Note routing of digitization power cable prior to removal.