TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 743 of 1158
TM 9-2320-366-20-5 Change 2 20-517 20-81. DIGITIZATION KIT POWER CABLE REMOVAL/INSTALLATION This task covers: a. Removal b. installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1) Batteries discounted (para 7-57) Kick panel removed (para 16-3) Power Distribution Panel removed for access (para 16-2) Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Tool Kit Electrical Contact Repair (Item 45 Appendix C) Materials/Parts Lockwasher (2) (Item 113.1, Appendix G) Ties, Cable, Plastic (Item 69, Appendix D) Lockwasher (6) (Item 107.1, Appendix G) Dispenser Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Terminal Lug (Item 279.01, Appendix G) Nut, Self-Locking (Item 146.1, Appendix G) Personnel Required (2) a. Removal. (1) Remove nut (1), lockwasher (2), washer (3), and terminal lug TL21 (4) from ground stud (5). Discard lockwasher. (2) Disconnect terminal lug TL14 (6) from terminal block TB2 connector 5 (7). NOTE Perform steps (1) through (4) on vehicle serial numbers 00001 through 11437.