TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 73 of 1158
TM 9-2320-366-20-5 17-10. M1084/M1086 HAND PUMP REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Pan, Drain (Item 24, Appendix C) Goggles, Industrial (Item 15, Appendix C) Gloves, Rubber (Item 13, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Cap and Plug Set (Item 14, Appendix D) Solvent, Dry Cleaning (Item 65, Appendix D) Rag, Wiping (Item 50, Appendix D) Parts Kit, Hydraulic Pump (Item 219, Appendix G) Lockwasher (4) (Item 96, Appendix G) Packing, Preformed (4) (Item 187, Appendix G) Gasket and Preformed Packing Kit (Item 43, Appendix G) a. Removal. (1) Position drain pan under hand pump (1). CAUTION Cap or plug hydraulic tube and hose to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag tube and hose connection points prior to disconnecting. (2) Disconnect hydraulic hose (2) from 90-degree fitting (3). (3) Disconnect hydraulic tube (4) from 90-degree fitting (5). 17-37