TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 719 of 1158
TM 9-2320-366-20-5 Change 2 20-493 (6) Remove two nuts (12), lockwashers (13), washers (14), cover (15), and two washers (14) from terminal block TB1 (16). Discard lockwasher. (7) Remove terminal lug TL22 (17) from terminal block TB1 connector 58 (18). (8) Remove terminal lug TL22 (19) from terminal block TB1 connector 58 (18). (9) Remove terminal lug TL22(19) from wire 146 and digitization power cable. (10) Strip insulation 5/16 (8 mm) on wire 146. (11) Install terminal lug (17) on wire 146. NOTE Perform step (7) on vehicles equipped with WTEC II transmission controllers. NOTE Perform step (8) on vehicles equipped with WTEC III transmission controllers. NOTE Perform steps (9) through (11) on vehicle serial numbers 00001 through 11347 equipped with WTEC III controls.