TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 693 of 1158
TM 9-2320-366-20-5 20-77. M1083/M1093 TANK AND PUMP UNIT TIEDOWN KIT INSTALLATION/REMOVAL This task covers: a. Installation b. Removal c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cargo bed side panels and stakes removed (TM 9-2320-366-10-1). Tools and Special Tools Sling, Cargo (Item 31, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Pin, Cotter (20) (Item 277, Appendix G) Lockwasher (4) (Item 90.1, Appendix G) Personnel Required (2) WARNING Ensure vehicle is on level ground prior to installation or removal of tank and pump unit. Failure to comply may result in serious injury or death to personnel or damage to equipment. a. Installation. NOTE Four middle turnbuckles are assembled the same way. One middle turnbuckle shown. (1) Position clamp half (1) in shackle (2). (2) Position clamp half (3) in shock mount (4). (3) Install clamp half (1) in clamp half (3) with spring collar (5) and pin (6). Change 1 20-467