TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 67 of 1158
TM 9-2320-366-20-5 17-9. M1084/M1086 MATERIAL HANDLING CRANE (MHC) TUBING REPLACEMENT This task covers: a. Hydraulic Tubing Locations b. Follow-On Maintenance INITIAL SETUP Equipment Conditions MHC positioned over cargo bed (TM 9-2320-366-10-1). Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Cap and Plug Set (Item 14, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) a. Hydraulic Tubing Locations. WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing should be removed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to a minimum. Failure to comply may result in injury to personnel. CAUTION Cap or plug tubes and connection points to prevent contamination of M1084/M1086 MHC hydraulic system. Failure to comply may result in damage to equipment. NOTE • Refer to Table 17-2. M1084/M1086 Material Handling Crane (MHC) Hydraulic Tubing Locations for tubing locations on the M1084/M1086 MHC. It may not be necessary to remove all hydraulic tubes at one time. • Tag tubes and connection points prior to removal. • Remove plastic cable ties as required. • Remove clamps and support brackets as required. • Position drain pan to collect oil. 17-31