TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 623 of 1158
TM 9-2320-366-20-5 20-73. M1085 COLLAPSIBLE DRUMS TIEDOWN KIT INSTALLATION/REMOVAL This task covers: a. Installation b. Removal c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cargo bed side panels and stakes removed (TM 9-2320-366-10-1). Tools and Special Tools Sling, Cargo (Item 31, Appendix C) Tool Kit, Genl Mech (Item 46, Appendix C) Tools and Special Tools (Cont) Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C) Wrench Set, Socket (Item 50, Appendix C) Materials/Parts Pin, Cotter (20) (Item 277, Appendix G) Personnel Required (2) WARNING Ensure vehicle is on level ground prior to installation or removal of collapsible drums. Failure to comply may result in serious injury or death to personnel or damage to equipment. a. Installation. NOTE • Rear middle chains are assembled the same way. One rear middle chain shown. • Steps (1) through (6) requires 39 link chain. (1) Position clamp half (1) in hook (2). (2) Position clamp half (3) in chain (4). (3) Install clamp half (1) in clamp half (3) with spring collar (5) and pin (6). 20-407