TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 601 of 1158
TM 9-2320-366-20-5 b. Installation. (1) Position bracket (1) in vise. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (2) Apply sealing compound to threads of four screws (2). (3) Install connector J921 (3) on bracket (1) with four screws (2) and self-locking nuts (4). (4) Install switch (5) on bracket (1) with locking ring (6), switch cover (7), lockwasher (8) and nut (9). (5) Close switch cover (7) on switch (5). (6) Install terminal lugs TL164 (10) and TL165 (11) on switch (5) with two lockwashers (12) and screws (13). (7) Apply adhesive to two screws (13), lockwashers (12), and terminal lugs TL164 (10) and TL165 (11). 20-385