TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 593 of 1158
TM 9-2320-366-20-5 b. Cleaning. WARNING • Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint or Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C). Failure to comply may result in injury or death to personnel. • If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry Cleaning Solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. Clean all metal parts with dry cleaning solvent. c. Assembly. (1) Install clamp (1) on mast (2) with two lockwashers (3), washers (4), and screws (5). (2) Install quick release pin (6) on housing (7) with lockwasher (8), washer (9), and screw (10). (3) Position housing (7) on mast (2). (4) Install quick release pin (6) in housing (7). 20-377