TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 581 of 1158
TM 9-2320-366-20-5 (4) Remove sheave (4), two detent plates (9), and washers (10) from fly section (2). (5) Remove bushing (11) from sheave (4). Discard bushing. (6) Remove fitting (12) from sheave (4). b. Installation. (1) Install fitting (1) in sheave (2). (2) Install bushing (3) in sheave (2). (3) Position sheave (2), two washers (4), and detent plates (5) in fly section (6). (4) Install washer (7), screw (8), chain assembly (9), and self-locking nut (10) in fly section (6). WARNING Wear leather gloves at all times when handling winch cable. Do not allow cable to slide through hands even with gloves on. Broken wires may cause injury to personnel. (5) Install wire rope (11) in sheave (2). (6) Install quick release pin (12) in fly section (6). 20-365