TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 559 of 1158
TM 9-2320-366-20-5 20-63. LIGHT MATERIAL HANDLING CRANE (LMHC) WINCH REPLACEMENT/REPAIR This task covers: a. Removal b. Base Plate Disassembly c. Winch Disassembly d. Cleaning/Inspection e. Winch Assembly f. Base Plate Assembly g. Installation h. Follow-On Maintenance INITIAL SETUP Equipment Conditions LMHC weight block and wire rope removed (para 20- 62). LMHC power cable removed (TM 9-2320-366-10-1). LMHC remote control cable removed (TM 9-2320-366- 10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Gloves, Rubber (Item 13, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Solvent, Dry Cleaning (Item 65, Appendix D) Grease, Molybdenum Disulfide (Item 24, Appendix D) Rag, Wiping (Item 50, Appendix D) Gasket (3) (Item 27, Appendix G) Personnel Required (2) a. Removal. (1) Loosen four screws (1) on winch (2). NOTE Step (2) and (3) require the aid of an assistant. (2) Slide winch (2) to rear of boom (3). (3) Remove winch (2) from boom (3). 20-343