TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 557 of 1158
TM 9-2320-366-20-5 WARNING Use care when removing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (4) Remove two springs (9) from winch assembly (10). (5) Position tensioner (11) for access. (6) Loosen two set screws (12) on drum (13). WARNING • Cable can become frayed or contain broken wires. Wear heavy leather-palmed work gloves when handling wire rope. Failure to comply may result in injury to personnel. • Never let moving cable slide through hands, even when wearing gloves. A broken wire could pierce through glove and cut hands. Failure to comply may result in injury to personnel. (7) Remove wire rope (5) from drum (13). b. Installation. (1) Position wire rope (1) in drum (2). (2) Tighten two set screws (3) on drum (2). (3) Position tensioner (4) on drum (2). WARNING Use care when installing springs. Springs are under tension and can act as projectiles when removed. Failure to comply may result in injury to personnel. (4) Install two springs (5) on winch assembly (6). 20-341