TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 556 of 1158
TM 9-2320-366-20-5 20-62. LIGHT MATERIAL HANDLING CRANE (LMHC) WEIGHT BLOCK AND WIRE ROPE REPLACEMENT/REPAIR This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). LMHC circuit breaker positioned to ON (TM 9-2320-366- 10-1). LMHC power cable installed (TM 9-2320-366-10-1). LMHC remote control cable installed (TM 9-2320-366-10- 1). LMHC wire rope assembly fully extended (TM 9-2320- 366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Gloves, Welder’s (Item 14, Appendix C) Materials/Parts Lockwasher (2) (Item 96, Appendix G) Personnel Required (2) a. Removal. NOTE Perform step (1) if replacing weight block. (1) Remove two nuts (1), screws (2), lockwashers (3), and weight blocks (4) from wire rope (5). Discard lockwashers. (2) Remove quick release pin (6) from boom (7). (3) Remove wire rope (5) from sheave (8). 20-340