TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 550 of 1158
TM 9-2320-366-20-5 20-60. LIGHT MATERIAL HANDLING CRANE (LMHC) ASSEMBLY/DISASSEMBLY (CONT) b. Disassembly. (1) Position boom in the 0-degree position (TM 9-2320-366- 10-1). (2) Remove two nuts (1), screws (2), lockwashers (5), and weight blocks (3) from winch cable (4). Discard lockwashers. NOTE Perform step (3) for stowage of weight block. (3) Install two screws (2) in weight blocks (3) with lockwashers (5) and nuts (1). (4) Remove quick release pin (6) from boom (7). (5) Remove winch cable (5) from boom sheave (8). (6) Install quick release pin (6) in boom (7). (7) Retract winch cable approximately 6 feet (1.8 m). (8) Disconnect remote control and power cables (TM 9- 2320-366-10-1). (9) Loosen four screws (9) on winch (10). (10) Slide winch (10) to rear of boom (7). (11) Remove winch (10) from boom (7). 20-334