TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 549 of 1158
TM 9-2320-366-20-5 (8) Position winch (10) on boom (8). (9) Slide winch (10) to front of boom (8). (10) Tighten four screws (11) on winch (10). (11) Connect power and remote control cables (TM 9-2320- 366-10-1). (12) Extend winch cable (12) approximately 6 feet (1.8 m). (13) Remove quick release pin (13) from boom (8). (14) Position winch cable (12) on boom sheave (14). (15) Install quick release pin (13) in boom (8). (16) Remove two nuts (15), lockwashers (16), and screws (17) from weight blocks (18). Discard lockwashers. (17) Install two weight blocks (18) on winch cable (12) with two screws (17), lockwashers (16), and nuts (15). (18) Position boom in stowed position (TM 9-2320-366-10-1). 20-333