TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 543 of 1158
TM 9-2320-366-20-5 20-59. M1089 FUEL/WATER CAN BRACKET KIT INSTALLATION/REMOVAL This task covers: a. Installation b. Removal c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Left catwalk removed (for installation) (para 14-4). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Drill Set, Twist (Item 6, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Nut, Self-Locking (8) (Item 156, Appendix G) Personnel Required (2) a. Installation. NOTE Reference points are front edge and roadside edge of left catwalk. (1) Measure and mark a line (1) on left catwalk (2) 3 in. (7.6 cm) from roadside reference. (2) Measure and mark a line (3) on left catwalk (2) 6 3/8 in. (16.3 cm) from front reference. (3) Measure and mark a line (4) on left catwalk (2) 3 1/2 in. (8.9 cm) from line (3). (4) Measure and mark a line (5) on left catwalk (2) 6 3/8 in. (16.3 cm) from roadside reference. (5) Measure and mark a line (6) on left catwalk (2) 6 1/8 in. (15.5 cm) from line (1). (6) Measure and mark a line (7) on left catwalk (2) 3 in. (7.6 cm) from roadside reference. 20-327