TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 513 of 1158
TM 9-2320-366-20-5 (2) Loosen clamp (5) on turbocharger intake hose (6). (3) Remove turbocharger intake hose (6) from intake air cleaner boot (7). (4) Remove nut (8), lockwasher (9), washer (10), and two terminal lugs TL37 (11) and TL36 (12) from terminal block (13). Discard lockwasher. NOTE Remove plastic cable ties as required. (5) Remove battery to 200 amp terminal block 24 vdc cable (14) from vehicle. b. Installation. NOTE Install plastic cable ties as required. (1) Position battery to 200 amp terminal block 24 vdc cable assembly (1) on vehicle. (2) Position terminal lugs TL36 (2) and TL37 (3) on terminal block (4) with washer (5), lockwasher (6), and nut (7). (3) Tighten nut (7) to 15-19 lb-ft (21-25 N·m). 20-297