TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 51 of 1158
TM 9-2320-366-20-5 (5) Remove self-locking nut (11), two washers (12), bolt (13), and bracket (14) from stowage box (2). Discard self-locking nut. WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. (6) Remove two rivets (15) and latch (16) from stowage box (2). b. Installation. (1) Install latch (1) on stowage box (2) with two rivets (3). (2) Position bracket (4) on stowage box (2) with bolt (5), two washers (6), and self-locking nut (7). (3) Position stowage box (2) on control panel (8) with two washers (9), lockwashers (10) and screws (11). (4) Position two washers (12) and bolts (13) in control panel (8) with two self-locking nuts (14). (5) Tighten self-locking nut (7) to 22-28 lb-ft (29-39 N·m). (6) Tighten two screws (11) to 8-10 lb-ft (9-11 N·m). (7) Tighten two self-locking nuts (14) to 22-28 lb-ft (29-39 N·m). Change 1 17-15