TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 50 of 1158
TM 9-2320-366-20-5 17-6. M1084/M1086 REMOTE CONTROL CABLE STOWAGE BOX REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10). M1084/M1086 hydraulic accumulator removed (para 17-11). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Drill, Portable, Electric (Item 7, Appendix C) Tools and Special Tools (Cont) Drill Set, Twist (Item 6, Appendix C) Tool Kit, Blind Rivet (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Nut, Self-Locking (3) (Item 167, Appendix G) Rivet, Blind (2) (Item 244, Appendix G) Lockwasher (2) (Item 94, Appendix G) a. Removal. (1) Open door (1) on stowage box (2). (2) Remove remote control cable (3) from stowage box (2). (3) Remove two self-locking nuts (4), bolts (5) and washers (6) from control panel (7). Discard self-locking nuts. (4) Remove two screws (8), lockwashers (9), washers (10), and stowage box (2) from control panel (7). Discard lockwashers. 17-14 Change 1