TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 494 of 1158
TM 9-2320-366-20-5 20-48. 200 AMP ALTERNATOR TO TERMINAL BLOCK 12 VDC CABLE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Spare tire lowered (TM 9-2320-366-10-2). Cab raised (TM 9-2320-366-10-1). Batteries disconnected (para 7-57). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Lockwasher (Item 96, Appendix G) Lockwasher (Item 105, Appendix G) a. Removal. NOTE Remove plastic cable ties as required. (1) Lift dust boot (1) on terminal lug TL60 (2). (2) Remove nut (3), lockwasher (4), washer (5), and terminal lug TL60 (2) from alternator terminal (6). Discard lockwasher. (3) Remove dust boot (1) from terminal lug TL60 (2). (4) Loosen clamp (7) on turbocharger intake hose (8). (5) Remove turbocharger intake hose (8) from intake air cleaner boot (9). 20-278