TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 485 of 1158
TM 9-2320-366-20-5 (5) Disconnect voltage regulator connector (11) from alternator (12). (6) Remove two screws (13), lockwashers (14), washers (15) and voltage regulator (16) from alternator (12). Discard lockwashers. b. Installation WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply sealing compound to threads of two screws (1). (2) Position voltage regulator (2) on alternator (3) with two washers (4), lockwashers (5), and screws (1). (3) Tighten two screws (1) to 75 lb-in. (8 N·m). (4) Connect voltage regulator connector (6) to alternator (3). 20-269