TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 478 of 1158
TM 9-2320-366-20-5 20-45. 200 AMP ALTERNATOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-57). Alternator belts removed (para 7-3). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Sling, Cargo (Item 31, Appendix C) Vise, Machinist (Item 48, Appendix C) Caps, Vise Jaw (Item 4, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Nut, Self-Locking (Item 153, Appendix G) Personnel Required (2) a. Removal. (1) Lift dust boot (1) on terminal lug TL6 (2). (2) Remove nut (3), lockwasher (4), washer (5), terminal lugs TL6 (2) TL2 (6) and fuse link (7) from alternator terminal (8). (3) Position fuse link (7), washer (5), lockwasher (4), and nut (3) on alternator terminal (8). (4) Lift dust boot (9) on terminal lug TL60 (10). (5) Remove nut (11), lockwasher (12), washer (13), and terminal lug TL60 (10) from alternator terminal (14). (6) Position washer (13), lockwasher (12) and nut (11) on alternator terminal (14). 20-262 Change 1