TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 476 of 1158
TM 9-2320-366-20-5 20-44. 200 AMP ALTERNATOR KIT REMOVAL (CONT) CAUTION Alternator pulley must be positioned in a vise equipped with vise jaw caps when loosening self-locking nut. Failure to comply may result in damage to equipment. (99) Position pulley (160) in vise. (100) Loosen self-locking nut (161). (101) Remove pulley (160) from vise. (102) Remove self-locking nut (161), washer (162), and pulley (160) from alternator (141). Discard self-locking nut. (103) Position washer (162) and self-locking nut (161) on alternator (141). (104) Position three clamps (116) on 12vdc cable (163) and 24vdc cable (164). (105) Position three clamps (116) on air inlet manifold (117) with three washers (115) and screws (114). (106) Tighten three screws (114) to 22-27 lb-ft (31-37 N·m). (107) Position 12vdc cable (163) and 24 vdc cable (164) on vehicle. 20-260