TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 456 of 1158
TM 9-2320-366-20-5 20-43. 200 AMP ALTERNATOR KIT INSTALLATION (CONT) (86) Connect air filter restriction gauge hose (102) to air flow sensor (103). (87) Install connector J106 (98) and dust cap lanyard (100) on chemical detection unit mounting bracket (101) with nut (99). (88) Install dust cap (97) on connector J106 (98). NOTE Step (89) requires the aid of an assistant. (89) Tighten two self-locking nuts (119) to 25-31 lb-ft (35-43 N·m). (90) Remove two nuts (120) and lockwashers (121) from reverse polarity relay 12V BAT terminal (122) and 12V LOAD terminal (123). (91) Remove two nuts (124) and lockwashers (125) from reverse polarity relay 24V LOAD terminal (126) and 24V BAT terminal (127). 20-240 Change 1