TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 45 of 1158
TM 9-2320-366-20-5 c. Inspection. WARNING Dry Cleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and gloves; use only in well ventilated area; avoid contact with skin, eyes, and clothes, and do not breathe vapors. Keep away from heat or flame. Never smoke when using solvent; the flashpoint for Type I Dry Cleaning Solvent is 100°F (38°C) and for Type II is 130°F (50°C). Failure to comply may result in serious injury or death to personnel. If personnel become dizzy while using Dry Cleaning Solvent, immediately get fresh air and medical help. If Dry Cleaning Solvent contacts skin or clothes, flush with cold water. If Dry Cleaning Solvent contacts eyes, immediately flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (1) Clean all metal parts with dry cleaning solvent. NOTE Replace any part that fails visual inspection. (2) Inspect swivel hook (1), latch (2), and spring (3) for cracks, pitting, and corrosion. (3) Inspect lanyard (4) for frayed wires and corrosion. (4) Check safety pin (5) for tight fit in latch (2). d. Assembly. (1) Install latch (1) on swivel hook (2) with spring (3), lanyard (4), screw (5), and self-locking nut (6). (2) Install safety pin (7) in latch (1). 17-9