TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 446 of 1158
TM 9-2320-366-20-5 20-43. 200 AMP ALTERNATOR KIT INSTALLATION (CONT) (19) Remove self-locking nut (30), and washer (31) from voltage regulator terminal (32). (20) Position terminal lug TL35 (33) on voltage regulator terminal (32) with washer (31), and self-locking nut (30). (21) Tighten self-locking nut (30) to 24 lb-in. (3 N·m). (22) Position dust boot (34) on terminal lug TL35 (33). (23) Remove screw (35), lockwasher (36), and washer (37) from alternator (16). (24) Position ground strap (38) and terminal lug TL5 (39) on alternator (16) with washer (37), lockwasher (36) and screw (35). (25) Tighten screw (35) to 60-84 lb-in. (7-9 N·m). (26) Position 12 vdc cable (40) and 24 vdc cable (41) in engine compartment with terminal lugs TL2 (42) and TL60 (43) located next to alternator (16). (27) Install dust boot (44) on 12 vdc cable (40). (28) Install dust boot (45) on 24 vdc cable (41). (29) Remove terminal lug TL6 (46) from wire (47). Discard terminal lug. (30) Position wire (47) in dust boot (45) with terminal lug TL2 (42). (31) Install terminal lug TL6 (48) on wire (47). 20-230 Change 1