TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 445 of 1158
TM 9-2320-366-20-5 WARNING 200 amp alternator weighs approximately 72 lbs (33 kgs). The aid of an assistant is required to install 200 amp alternator. Failure to comply may result in injury to personnel. NOTE Step (12) requires the aid of an assistant. (12) Position alternator (16) on alternator bracket (4) with washer (18), screw (19), and self-locking nut (20). (13) Position washer (21), screw (22), washer (23), and self- locking nut (24) on alternator (16). (14) Tighten self-locking nut (20) to 45-55 lb-ft (61-75 N·m). (14.1) Tighten self-locking nut (24) to 25-32 lb-ft (35-43 N·m). (15) Remove self-locking nut (25) and washer (26) from voltage regulator terminal (27). (16) Position terminal lug TL110 (28) on voltage regulator terminal (27) with washer (26) and self-locking nut (25). (17) Tighten self-locking nut (25) to 24 lb-in. (3 N·m). (18) Position dust boot (29) on terminal lug TL110 (28). 20-229 Change 1