TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 443 of 1158
TM 9-2320-366-20-5 20-43. 200 AMP ALTERNATOR KIT INSTALLATION This task covers: a. Installation b. Follow-On Maintenance INITIAL SETUP Equipment Conditions 100 amp alternator removed (para 7-2). 100 amp reverse polarity relay removed (para 7-30). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Socket Set, Socket Wrench (Item 36, Appendix C) Caps, Vise Jaw (Item 4, Appendix C) Vise, Machinist (Item 48, Appendix C) Materials/Parts Ties, Cable, Plastic (Item 69, Appendix D) Nut, Self-Locking (Item 153, Appendix G) Nut, Self-Locking (M1093/M1094) (2) (Item 156, Appendix G) Nut, Self-Locking (3) (Item 168, Appendix G) Washer, Spring (M1093/M1094) (2) (Item 293, Appendix G) Lockwasher (2) (Item 92, Appendix G) Personnel Required (2) a. Installation. NOTE Retain belt adjusting arm for future installation. (1) Remove two screws (1), lockwashers (2), and belt adjusting arm (3) from alternator bracket (4). Discard lockwashers. (2) Position belt adjusting arm (5) on alternator bracket (4) with two lockwashers (2) and screws (1). (3) Tighten two screws (1) to 25-32 lb-ft (35-43 N·m). Change 1 20-227