TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 43 of 1158
TM 9-2320-366-20-5 Change 2 17-7 17-4. M1084/M1086 HOOK BLOCK AND CABLE ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions MHC erected over cargo bed (TM 9-2320-366-10-1). Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Socket, Socket Wrench (Item 70, Appendix B) Cutter, Bolt (Item 16, Appendix B) Gloves, Welders (Item 14, Appendix C) Goggles, Industrial (Item 15, Appendix C) Gloves, Rubber (Item 13, Appendix C) Apron, Rubber (Item 3, Appendix C) Weight, 200-250 lbs (91-113 kgs) Materials/Parts Solvent, Dry Cleaning (Item 65, Appendix D) Wire, Nonelectrical (Item 72, Appendix D) Pin, Cotter (Item 232, Appendix G) Pin, Cotter (Item 227, Appendix G) Nut, Self-Locking (Item 140, Appendix G) Nut, Self-Locking (Item 174, Appendix G) Clamp, Wire Rope, Saddled (Item 9.1, Appendix G) References FM 5-125 TB 43-0142 a. Removal. (1) Remove cotter pin (1) from nut (2). Discard cotter pin. (2) Remove nut (2), washer (3), hook block (4), washer (5), and screw (6) from wedge socket (7). WARNING Cable can become frayed or contain broken wires. Wear heavy leather-palmed gloves when handling cable. Frayed or broken wires can injure hands. Failure to comply may result in injury to personnel.