TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 424 of 1158
TM 9-2320-366-20-5 19-20. M1089 HYDRAULIC TANK AND MANIFOLD ASSEMBLY REPAIR (CONT) (3) Install two sections of resilient mounts (7) in each side of support plate (8). (4) Position support plate (8) on base plate (9) with two screws (10), washers (11), and self-locking nuts (12). (5) Tighten two self-locking nuts (12) to 76-84 lb-ft (103- 114 N·m). (6) Install support plate (8) on rear bracket (13) with four washers (14) and screws (15). CAUTION Holes in bolts must align towards center of sight level indicator. Failure to comply may result in damage to equipment. (6.1) Matchmark bolt (16) so that mark aligns with hole in shank of bolt. (7) Position two gaskets (16) and sight level indicator (17) on hydraulic tank (18) with two washers (19) and screws (20). (8) Install two nuts (21) on screws (20) with matchmarks aligned. 19-108 Change 1