TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 42 of 1158
TM 9-2320-366-20-5 17-3. M1084/M1086 BOOM SHEAVE REPLACEMENT (CONT) WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (6) Apply sealing compound to threads of screw (10). (7) Install washer (11) and screw (10) in locking pin (6). (8) Tighten nut (9). (9) Bend tab of key washer (8) so that the tab lines up with one of four slots on nut (9). (10) Install grease fitting (12) in sheave pin (3). c. Follow-On Maintenance. (1) Lubricate sheave with grease (Appendix H). (2) Test operate MHC (TM 9-2320-366-10-1). End of Task. 17-6