TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 385 of 1158
TM 9-2320-366-20-5 19-16. M1089 UNDERLIFT/WINCH HYDRAULIC HOSES REPLACEMENT This task covers: a. Hydraulic Hose Locations b. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Pan, Drain (Item 24, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Crowfoot Attachment, Socket Wrench (Item 12, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Cap and Plug Set (Item 14, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) a. Hydraulic Hose Locations. WARNING • Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. • Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing should be removed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to a minimum. Failure to comply may result in injury to personnel. CAUTION Cap or plug hoses and connection points to prevent contamination of M1089 underlift and winch hydraulic system. Failure to comply may result in damage to equipment. NOTE • Refer to Table 19-5. M1089 Underlift Hydraulic Hose Locations for locations of hydraulic hoses on the M1089 underlift and winches. It may not be necessary to remove all hydraulic hoses at one time. • Tag hoses and connection points prior to removal. • Remove plastic cable ties as required. • Remove clamps and support brackets as required. • Position drain pan to collect oil. 19-73