TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 381 of 1158
TM 9-2320-366-20-5 19-14. M1089 HYDRAULIC TANK FILTER REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Materials/Parts Gasket (Item 29, Appendix G) Filter Element, Fluid (Item 16, Appendix G) a. Removal. (1) Remove six screws (1) and washers (2) from filter cover (3). (2) Remove filter cover (3) and gasket (4) from hydraulic tank (5). Discard gasket. NOTE Some filters were originally equipped with a preformed packing. If equipped, remove and discard preformed packing. (3) Remove filter (6) from filter cover (3). Discard filter. b. Installation. NOTE If preformed packing is included with replacement filter kit, discard preformed packing. (1) Install filter (6) on filter cover (3). (2) Position gasket (4) and filter cover (3) on hydraulic tank (5) with six washers (2) and screws (1). (3) Tighten six screws (1) to 23-25 lb-ft (31-34 N·m). End of Task. 19-69