TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download

Page 380 of 1158

TM 9-2320-366-20-5 19-13. HYDRAULIC OIL FILTER ASSEMBLY SERVICE/REPLACEMENT (CONT) c. Installation. NOTE Apply lubricating oil to preformed packings during installation. (1) Install hydraulic oil filter assembly (1) on bracket (2) with four washers (3) and screws (4). (2) Tighten four screws (4) to 20-24 ft-lb (27-33 N·m). (3) Apply antiseizing tape to threads of hydraulic oil sampling valve (5). (4) Install hydraulic oil sampling valve (5) in adapter (6). (5) Install preformed packing (7) on adapter (6). (6) Install adapter (6) in hydraulic oil filter assembly (1). (7) Install preformed packing (8) on fitting (9). (8) Install fitting (9) on hydraulic oil filter assembly (1). (9) Connect hose (10) to fitting (9). (10) Connect hose (11) to adapter (6). d. Follow-On Maintenance. (1) Fill hydraulic reservoir (Appendix H). (2) Start engine (TM 9-2320-366-10-1). (3) Check for oil leaks around hydraulic oil filter. (4) Shut down engine (TM 9-2320-366-10-1). End of Task. 19-68