TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 378 of 1158
TM 9-2320-366-20-5 19-13. HYDRAULIC OIL FILTER ASSEMBLY SERVICE/REPLACEMENT This task covers: a. Service b. Removal c. Installation d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Filter Element, Fluid (Item 20, Appendix G) (Service) Seal, Plain (Item 271.1, Appendix G) (Service) Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Tape, Antiseizing (Item 66, Appendix D) Oil, Lubricating, OE/HDO 10W (Item 43, Appendix D) Filter Element, Fluid (Item 20, Appendix G) Packing, Preformed (2) (Item 180, Appendix G) a. Service. (1) Remove hydraulic oil filter assembly bowl (1) from filter assembly base (2). (2) Remove fluid filter element (3) from oil filter assembly base (2). Discard fluid filter element. (3) Remove seal (4) from hydraulic oil filter assembly base (1). Discard seal. NOTE Apply lubricating oil to seal prior to installation. (4) Install seal (4) on hydraulic oil filter assembly base (2). (5) Install fluid filter element (3) in hydraulic oil filter assembly base (2). (6) Install hydraulic oil filter assembly bowl (1) on filter assembly base (2) and hand tighten. 19-66 Change 1