TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 370 of 1158
TM 9-2320-366-20-5 19-11. CAB HYDRAULIC CYLINDER REPLACEMENT (CONT) (6) Apply grease to inside of mounting bracket (5). (7) Assemble control cam (9) and spring washer (10) and insert in mounting bracket (5) with long side of control cam aligned in long slot of mounting bracket. NOTE Cab hydraulic cylinder is installed so that hydraulic fittings face away from engine and arrow on top of mounting bracket points toward front of vehicle. (8) Install cab hydraulic cylinder (4) on stud (11) with spring washer (12) and cotter pin (13). (9) Remove hoses (14 and 15) from tube nipple. 19-58