TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 365 of 1158
TM 9-2320-366-20-5 19-11. CAB HYDRAULIC CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Wrench, Torque 0-600 lb-ft (Item 60, Appendix C) Wrench Set, Socket (Item 50, Appendix C) Pan, Drain (Item 24, Appendix C) Sling, Endless (Item 32, Appendix C) Gloves, Rubber (Item 13, Appendix C) Goggles, Industrial (Item 15, Appendix C) Cab Support Tool (Item E-4, Appendix E) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 20, Appendix D) Ties, Cable, Plastic (Item 69, Appendix D) Nipple, Tube (Item 33, Appendix D) Grease, Automotive and Artillery (GAA) (Item 22, Appendix D) Hydraulic Fluid A (Item 25, Appendix D) Packing, Preformed (2) (Item 181, Appendix G) Packing, Preformed (Item 188, Appendix G) Nut, Self-Locking (Item 170, Appendix G) Pin, Cotter (Item 230, Appendix G) Pin, Cotter (Item 231, Appendix G) Washer, Spring (Item 286, Appendix G) Washer, Spring (Item 295, Appendix G) Personnel Required (2) a. Removal. (1) Place drain pan under cab hydraulic cylinder (1). WARNING Hydraulic fluid (MIL-H-5606) is TOXIC. Wear protective goggles and gloves; use only in well-ventilated area; avoid contact with skin, eyes, and clothes. Skin and clothing that come in contact with hydraulic oil should be washed immediately. Saturated clothing should be removed immediately. Failure to comply may result in injury to personnel. NOTE • Remove plastic cable ties as required. • Tag hoses and connection points prior to disconnecting. (2) Disconnect hoses (2 and 3) from 90-degree fittings (4 and 5). 19-53