TM-9-2320-366-20-5 MTV Unit Maintenance Manual M1083 Series - Volume 5 Download
Page 359 of 1158
TM 9-2320-366-20-5 19-10. SUSPENSION CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 46, Appendix C) Goggles, Industrial (Item 15, Appendix C) Gloves, Rubber (Item 13, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C) Wrench Set, Socket (Item 50, Appendix C) Socket Set, Socket Wrench (Item 34, Appendix C) Materials/Parts Cap and Plug Set (Item 14, Appendix D) Hydraulic Fluid A (Item 25, Appendix D) Packing, Preformed (2) (Item 186, Appendix G) Nut, Self-Locking (Item 128, Appendix G) Pin, Cotter (Item 226, Appendix G) Personnel Required (2) a. Removal. NOTE Left and right suspension cylinders are removed the same way. Right side shown. (1) Remove two quick release pins (1) from suspension cylinder (2). (2) Remove screw (3) and two lanyards (4) from suspension cylinder (2). 19-47